专为狭小空间设计
用于机架中单个服务器的锁定与解锁的双稳态脱扣式电磁铁
定制电磁铁和阀门 for Industrial Applications
When you need a custom solenoid to fit your industrial equipment and system needs, TLX Technologies works with you to design the best solution.
防爆执行器（带安装反馈功能）
通过 UL HazLoc, ATEX 和 IECEx 认证, 可用于危险气体环境. 适用于工作压力高达 300 bar 的系统.
High-Pressure Supervised Direct-Acting Solenoid Valve
This solenoid valve is designed for systems with operating pressures up to 300 bar and features integrated installation supervision.
Discrete Proportional Valve System
Uses an intelligent combination of simple binary (ON/OFF) solenoid valves with varied port size to achieve stepped proportional control.
Peak and Hold Control Module
The peak and hold control module allows any-size solenoid to operate at a higher force without overheating the coil.
双位脱扣式电磁铁
这款轻型电磁铁仅需一个短促的电流脉冲即可驱动衔铁动作，并且在无持续供电的情况下仍能保持位置。
Low-Profile Latching Solenoid Lock
This two-position, latching solenoid lock offers zero power consumption in both the engaged and disengaged position.
集成安装反馈的直动式电磁阀
这款电磁阀专为气体和混合系统设计，工作压力可达 150 巴，并具备安装是否到位的监测功能。
One-Inch Stroke Shotbolt Solenoid
One-inch stroke shotbolt solenoid is suitable for a variety of locking applications.
Latching Diaphragm Solenoid Valve
This solenoid valve was originally designed for use with a smart water meter.
Long-Stroke Latching Solenoid
This latching solenoid needs no power to hold in either position and runs efficiently on 4 AA batteries.
Proportional Pressure Relief Valve
This direct-acting, normally open, proportional pressure relief valve can be designed to operate over various pressure ranges.
Coolant Control Valve
This fluid valve originally designed to control coolant can be used with a variety of mediums including: coolant, water and chemicals.
Compact Latching Solenoid
This compact latching solenoid is a fully encapsulated design.
D-Frame Solenoid
This solenoid designed to work in the air intake stream of a vehicle and can be designed as a constant current or latching solenoid.
Three-Way Proportional Pressure Reducing-Relieving Valve
This proportional solenoid valve is a direct-acting, normally open, continuously variable pressure relief valve.
Proportional Solenoid Actuator
This proportional solenoid actuator (used to power proportional hydraulic valves in off-highway applications) is direct-acting and continuously variable.
Proportional Pressure Reducing Relieving Valve
This continuously variable pressure reducing relieving valve can be designed to operate over various pressure ranges to optimize controllability.
XX Atomic Layer Deposition Pilot Valve
A two-position, three-way pilot valve with exceptional performance including ultra-fast response, high operating temperatures and compact design.
Three-Position Push Pull Solenoid
This continuous duty “three-position” solenoid example features a push-pull from a center position and allows for a tighter tolerance.
Magnetic Locking Solenoid
Latching solenoids provide an excellent solution for applications requiring a fast response time and low power consumption.
手动复位脱扣式电磁器
这种电磁器在保持位置时无需持续供电，触发时能够快速释放，并且在释放后会一直保持该状态，直到手动复位。
Miniature Latching Solenoid
Miniature solenoids provide options for applications with limited space or size constraints.
Latching Solenoid with Burst Pin
The latching solenoid is designed for fire suppression systems that require high force to penetrate a burst disc.
Miniature U-Frame Solenoid
This example of a continuous duty solenoid is miniature in size but with a relatively long stroke and high force.
Bidirectional Latching Solenoid
Compact design and low power consumption make this solenoid ideal for battery-operated applications.
Open Frame Latching Solenoid
The compact design and low cost construction of this open frame latching solenoid allow for flexibility in a variety of applications.
Heavy Duty Latching Solenoid
This solenoid example utilizes a 100 ms pulse to latch and hold in position using a permanent magnet.
Intrinsically Safe Latching Solenoid
This latching solenoid example features a high-speed "extend" operation and is an excellent solution for highly flammable or combustible environments.
Large Latching Solenoid
This latching solenoid uses inherent residual magnetism or permanent magnets to maintain either of its positions without consuming power.
Pressure Release Solenoid Valve
This solenoid valve example is used for applications needing to quickly reduce pressure within an enclosed cavity or transmit fluid to another passage.
Pull Type Locking Solenoid
This example of a continuous duty solenoid remains in the locked position utilizing no power.
High-Speed Dispensing Valve
This is an example of a high-speed solenoid mated to a multiple port spool configuration for the control of output fluids to very fine parameters.
Miniature Solenoid Air Valve
This example of an ultra small solenoid air valve is suitable for a variety of low pressure applications.
Residual Magnetism Latching Solenoid
This solenoid example is a linear on-off design with a built-in latching feature that holds the solenoid in position using residual magnetism.
Three-Position Latching Solenoid
This latching solenoid is an example of a three-position device with spring center and latch to end positions.
脱扣式电磁铁/电磁器
该产品仅需短暂的电力脉冲即可驱动，并可在无需持续供电的情况下保持当前位置
Miniature Manual Reset Latching Solenoid
This latching solenoid example is manually actuated and holds without the use of power making it ideal for applications requiring low power consumption.
其他资源
Low-Profile Solenoid Lock with Supervisory Feedback
TLX Technologies introduces our newest innovation in solenoid locking mechanisms.
Integrated Supervision for Solenoid Valves
A family of supervised direct-acting solenoid valves, with an integrated supervisory feature, that can accommodate the operating pressure of any system up to 300 bar.
Solenoids Help Control Injection Molding
A manufacturer of foam injection molding machines needed to refine their product to better suit a client that made seats for automotive OEMS. TLX engineers designed a custom latching solenoid that operated in high temperatures and provided the precise control required for the molding process.
A Challenge to Durable Solenoid Design
TLX was approached with an application that called for a solenoid valve to operate while completely submerged in the hot automatic transmission fluid of an all-terrain vehicle...Easy right? Well, our engineers were up for the challenge.
