Integrated Supervision for Solenoid Valves
A family of supervised direct-acting solenoid valves, with an integrated supervisory feature, that can accommodate the operating pressure of any system up to 300 bar.
定制电磁铁和阀门 for On-Off Applications
On-Off solenoids are used in applications requiring the constant application of power to move and/or hold in set positions. This constant application of power causes the coil in the solenoid to heat up limiting the force for a given size. Standard on-off solenoid designs can compensate for this decrease in force by either increasing the size of the solenoid or providing for a higher coil temperature rise if the application will allow it.
High-Pressure Supervised Direct-Acting Solenoid Valve
This solenoid valve is designed for systems with operating pressures up to 300 bar and features integrated installation supervision.
Peak and Hold Control Module
The peak and hold control module allows any-size solenoid to operate at a higher force without overheating the coil.
集成安装反馈的直动式电磁阀
这款电磁阀专为气体和混合系统设计，工作压力可达 150 巴，并具备安装是否到位的监测功能。
One-Inch Stroke Shotbolt Solenoid
One-inch stroke shotbolt solenoid is suitable for a variety of locking applications.
Coolant Control Valve
This fluid valve originally designed to control coolant can be used with a variety of mediums including: coolant, water and chemicals.
Solenoid Vent Valve
Normally closed, three-port solenoid vent valves designed with a zero leakage rate and a minimum life of 120,000 cycles.
D-Frame Solenoid
This solenoid designed to work in the air intake stream of a vehicle and can be designed as a constant current or latching solenoid.
Three-Position Push Pull Solenoid
This continuous duty “three-position” solenoid example features a push-pull from a center position and allows for a tighter tolerance.
Miniature U-Frame Solenoid
This example of a continuous duty solenoid is miniature in size but with a relatively long stroke and high force.
Pressure Release Solenoid Valve
This solenoid valve example is used for applications needing to quickly reduce pressure within an enclosed cavity or transmit fluid to another passage.
Pull Type Locking Solenoid
This example of a continuous duty solenoid remains in the locked position utilizing no power.
High-Speed Dispensing Valve
This is an example of a high-speed solenoid mated to a multiple port spool configuration for the control of output fluids to very fine parameters.
Miniature Solenoid Air Valve
This example of an ultra small solenoid air valve is suitable for a variety of low pressure applications.
其他资源
Automating Support in Running Shoes with Solenoids
A manufacturer of running shoes wanted their shoes to automatically adjust to the speed of the wearer, providing additional comfort and support. TLX designed a miniature solenoid air valve with magnetic latching technology to integrate into the shoe’s cushioning system.
Solenoids for Motorcycle Engines
A manufacturer needed an automatic compression release valve for a motorcycle engine. TLX Technologies designed a solenoid valve that met all the requirements and reduced total vehicle cost.
Solenoids at Work in SCR Systems
Diesel engine manufacturers are utilizing Selective Catalytic Reduction (SCR) technology to meet more stringent emissions regulations. These SCR systems use diesel exhaust fluid, better known as AdBlue®, injected into the exhaust stream to create a chemical composition that changes the exhaust into a mixture of nitrogen and oxygen.
Three-Position Solenoid Helps Improve Vehicle Emissions
An automotive company needed a solution to open and close the valve in their fuel vapor recirculation system. TLX Technologies designed an effective three-position solenoid.
